maszyny do obróbki metalu / inne maszyny do obróbki metalu
Producent: DMG MORI
Model:DMF 300|11
Typ maszyny: Wytaczarki szybkoobrotowe
Numer pozycji: 166896712
Ilość: 1
Data: 15.04.2025
Lokalizacja:
Niemcy
Cena:
Seller-item-No.:030326
| General | |
| Travelling column machine; Control: CELOS with Siemens 840D sl Operate | |
| Working area 1 | |
| Longitudinal | 3000 mm |
| Cross | 1100 mm |
| Vertical | 1050 mm |
| Feed drives: | |
| Feed rate X / Y / Z | 80000/80000/80000 mm/min |
| Rapid feed X / Y / Z | 80/80/80 m/min |
| NC-swivel head (B-axis) | Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ft |
| Dynamic package for DMF 300|11 linear | Dynamic package for DMF 300|11 linear Linear motor X-axis with 80 m/min // 262.48 ft/min Rapid speed XYZ 80 m/min // 262.48 ft/min Acceleration XYZ 8 m/s² // 26.25 ft/s² Active cooling for Linear motor |
| Package Mill / Turn 12,000 rpm, HSK-A100 | Package Mill / Turn, 12,000 rpm HSK-A100 (Only available for Siemens 840D solutionline) NC-Mill-Turn-table d 1,050 mm / 41.3 in (left) C-axis direct drive, speed max. 700 rpm Integrated balancing system Milling spindle power 44/32 kW (40/100% ED) tool hol |
| Cabine | Full protection cabin |
| NC-subtable 700-1, A-axis, left working area | NC-sub table 700-1 (A-axis) Left working area |
| Removable partition wall DMF |11 | Partition wall removable for pendulum machining, 2 working spaces |
| Internal Coolant Supply 80bar/980l frequency controlled | Internal coolant supply (ICS) with paper type filter Papertype-Filter 20-80 Bar // 290-1160 psi frequenzy controlled 980 l tank // 258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle |
| Coolant tempering for internal coolant 980l | Coolant tempering for internal coolant unit 980l / 259 gallon: Heating capacity max.: 4 kW / 5.3 hp Cooling capacity max.: 4 kW / 5.3 hp (only in combination with internal coolant unit 980l) |
| Chip flushing for working area | Flushing for working area Additional flushing of the working area doors and cabin sidewalls, Bed flushing included (only available starting internal coolant supply 980l) |
| Air blast through spindle centre | Air blast through spindle centre activated by M function, maintained air, low oil rate possible |
| Swarf conveyor, apron conveyor | Swarf conveyor,type apron conveyor recommended for large swarf and thread chips |
| Oil mist separator (with partition wall) | Oil and emulsion mist separator system 2 pieces per machine implemented in right and left cabin side wall. mechanical filter system 2x1600 m³/h |
| Infrared measuring probe PP60 optical | Infrared touch Probe for ISO 50 make Renishaw PP 60 optical (OMP 60) Tool taper suitable for the spindle |
| Combi-Tool measuring | Combi - Tool measuring Blum LaserControl LC52 DIGILOG Laser-System for milling tools 3D-probe for turning tools |
| 3D quickSET elevated constructuion | 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe) |
| Sensor D5452871 package i4.0 | Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor |
| Door drive for working area doors | Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents |
| Signal lamp 4-colour | Signal lamp, 4 colours |
| ATC (Application Tuning Cycle) | ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed |
| Operation mode 4 | Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in. |
| Digital Manufacturing Package | Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b |
| Service Agent | Service Agent Overview of all maintenance work on the machine |
| Messenger V4 | The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop |
| Special equipment | - Tool magazine 30 places SK50/HSK-A100 Chain magazine with double gripper - Additional control panel at tool input station Mirrored tool list (control panel) - Adaptive coolant supply Automatic optimisation and control of the ICS flow rate depe |
| Special equipment | Control system is equipped with CELOS X and ErgoLineIV control panel with 24 screen |
| DMG MORI | DMF 360|11 | ||
| DMG MORI | DMF 260|11 | ||
| DMG MORI | DMF 200|8 | ||
| DMG MORI | DMF 260|11 | ||
| 2016 | DMG MORI | DMF 260/11 | |
| 2017 | DMG MORI | WASINO G 100 | 300 |
